Skylight Replacement

Original skylights

This shows the original factory installed skylights that leak

Temporary solution

Until we implemented a final fix, this photos shows using some expensive white tape to seal the edges. It worked temporarily.

Removing the old glass

Breaking it out

The old glass was fused so well in some places that we could not pry it up. So, we shattered the glass and removed it.

Clean up the edges

New plexiglass panels ready to install

New panels in place

Sealant applied and ready for top frame

Final installation

The screws around the edges were only used to hold the panels in place during curing time. I would prefer not to have used those. That would be my only change in the entire process.

The final look